Southern Rose New Construction Windows
Vinyl Windows and Doors

Vinyl New Construction Windows and Doors

Southern Rose Flagship Product Lines

MGM's Southern Rose has the right window or door solution for your new construction project. Because of the many products that MGM manufactures, the right product can be found to meet most any budget, building codes and efficiency requirements that your project requires. Our product line is extremely deep. In order to facilitate a quick look and comparison of our product line we have a convenient comparison table:

Southern Rose product comparison

Hover over the series number for a short description. Click the highlighted images for the series' gallery.

Once the gallery opens, click the image to see the next image in the series or click outside of the pop up box to close the pop up box.

5610 Series Full Jamb (4 9/16) {Premium Vinyl Single Hung window}

Product types available: Single Hung, Picture Window, Shapes
Features and benefits:
  • 4 9/16" Vinyl Jamb
  • Withstands a wind load of 153 MPH
  • Protects against leaking with rain gusts of up to 48 MPH
  • 180 Brick mould
  • Full length finger plow on sash horizontals
  • Continuous head & sill
  • 14o Sloped sill for superior water run-off
  • 3/4" Insulated glass for energy efficiency
  • Concealed block and tackle balance system
  • Aluminum Sill nail fin for added strength and rigidity
  • Replaceable sill tower
  • Integral 1/4 inch shim to eliminate sill crowning

This window is suitable for residential and light commercial applications. The window system is designed to mimic the look of a "shop built" window, but, obviously, avoids rotting sash and rotting sill issues associated with wood windows. Sash has wide rails and narrow styles to further enhance the "wood look". If your putting jamb extensions on your vinyl single hung and trimming your window system with casing, then you really need to consider this window. This is a high performance Single Hung window that looks like wood from the curb, has a true 180 brickmould, a 14 degree slope sill--like a traditional stile wood window. This window is will pass Design pressure ratings of DP40 if ordered with single strength glass and will pass a DP50 load (3'0 x 6'0 or less) if ordered with double strength glass (DSB/2CL). The DP50 configuration will withstand a wind load of 171 MPH without the window breaking. A DP50 window also has to pass a water test with wind blowing onto the window at 54 MPH. Our Series 5610 passes this stringent test, so in other words, the window will not leak with rain blowing against the window at 54 MPH. Our Series 5610 comes with a factory integral mull on multiple windows, which creates a continuous head and sill--which further eliminates leaks in the field. If you can find a 4 9/16 jamb vinyl window that looks aesthetically pleasing and performs better than our window, then, by all means--buy it!

New independent test data as of February 28th, 2014
5610 SH [48"x 76" - 1CL] - DP 45 Water / DP 30 Structural
5610 SH [48"x 76" - 1CL] - DP 45 Water / DP 30 Structural
5610 SH [48" x 76" - 2CL] - DP 45 Water / DP 35 Structural
5610 SH [48" x 60" - 1CL] - DP 45 Water / DP 40 Structural
5610 SH [36" x 72" - 1CL] - DP 45 overall
5610 SH [36" x 72" - 2CL] - DP 50 overall
5610 TWSH [36" x 36" x 72" - 1CL] - DP 45 Water / DP 35 Structural
5610 TWSH [36" x 36" x 72" - 2CL] - DP 45 overall

5640 Series Vinyl Single Hung window (5610 with integral transom on top)

This is a subset item to the 5610, we separate it from the 5610 Series for emphasis and awareness. At MGM we have product that nobody else in the industry has even considered.
Features and benefits:
  • Integral transom on top of 5610
  • 4 9/16" Vinyl Jamb
  • Withstands a wind load of 153 MPH
  • Protects against leaking with rain gusts of up to 48 MPH
  • 180 Brick mould
  • Full length finger plow on sash horizontals
  • Continuous head & sill
  • 14o Sloped sill for superior water run-off
  • 3/4" Insulated glass for energy efficiency
  • Concealed block and tackle balance system
  • Aluminum Sill nail fin for added strength and rigidity
  • Replaceable sill tower
  • Integral 1/4 inch shim to eliminate sill crowning
Single Hung Window 5640

This is a 5610 Series single hung with an integral transom. The jamb is a continuous one-piece design. Unlike other window manufactures in which a transom is mounted on top of a single hung with an "H-mull". This gives the window a more traditional look and also greatly improves leak issues that could be possible by a typical two-piece design. If ordering a 5640, all other items with the order should be ordered as 5610's, such as Picture windows and stand along single hungs (i.e., no transoms on top).

6010 Series Mid-level Vinyl Single Hung window (3/4 OA glass)

Product types available: Single Hung, 2-Section Slider, 3-Section Slider, Picture Window, Shapes
Vinyl Colors Available:
EuroWhite, Tan (Beige),Earthtone
  • Designed to withstands a wind load of 131 MPH
  • Protects against leaking with rain gusts of up to 54 MPH
  • 180 Brick mould
  • Easy to operate recessed tilt latches
  • 5o Sloped sill
  • Integral nail fin makes for an easier set-in-place and nail installation
  • Fusion welded sash is reinforced with aluminum
  • 3/4" Insulated glass for energy efficiency
  • Continuous head and sill
  • Concealed block and tackle balance system
  • Available in euro-white, tan, earthtone
  • Available in painted bronze exterior
  • Custom exterior colors available
Single Hung Window 6010

This window is suitable residential application and is fully tested and vetted for the multi-family segment of the market. Available in bronze or earthtone exterior paint (as well as custom colors) and white/tan/earthtone interior, this window now meets meets the color demands of Architects and builders. The window has wet glaze "drop-in sash" design. The window has 3/4 OA insulated glass. Similar to our 5010 series, this window is positioned for the cost conscious. This window has been tested to a design pressure of 30 (DP30) and will withstand a wind load of 131 MPH without the window breaking. {A DP50 upgrade is available--see the 6060SH in the WindStrong Section} The 6010 series will pass a DP50 water test. So in other words, the 6010 Series window will not leak with rain blowing against the window at 54 MPH. Our Series 6010 comes with a factory integral mull on multiple windows, which creates a continuous head and sill--which further eliminates leaks in the field. If your in the market for a Single Hung window that has a 180 brickmould, a 5 degree slope sill--then the 6010 window is the window for you. If you can find a cost conscious vinyl window with the curb appeal of the 6010 Series, and performs better than our window, then, by all means--buy it!

Florida approval for the 6060 Single hung window

•6060 Single Hung
FL-9607



Single Family Home with 6010 Series Bronze exterior finish
6010 Series Painted vinyl window single family

6040 Series Vinyl Single Hung window (6010 w/ integral transom on top)

This is a subset item to the 6010, our question is: Why order a transom mulled to the top of a single hung when you can order a one-piece unit which will look better and will be more water tight?
Vinyl Colors Available:
EuroWhite, Tan (Beige),Earthtone
  • 6010 with integral transom
  • Eliminate the cost of a mulled transom
  • Less chance of water leaks between mulled units
  • Designed to withstands a wind load of 131 MPH
  • Protects against leaking with rain gusts of up to 54 MPH
  • 180 Brick mould
  • Easy to operate recessed tilt latches
  • Fusion welded sash is reinforced with aluminum
  • 3/4" Insulated glass for energy efficiency
  • Continuous head and sill
  • Concealed block and tackle balance system
  • Available in euro-white, tan, earthtone
  • Available in painted bronze exterior
  • Custom exterior colors available
Single Hung Window 6410

This is a 6010 Series single hung with an integral transom. The jamb is a continuous one-piece design. Unlike other window manufactures in which a transom is mounted on top of a single hung with an "H-mull". This gives the window a more traditional look and also greatly improves leak issues that could be possible by a typical two-piece design. If ordering a 6410, all other items with the order should be ordered as 6010's, such as Picture windows and stand along single hungs (i.e., no transoms on top).

6010 SHNJ Series Vinyl Single Hung Window
(6010 without the J-Channel)

Product types available: Single Hung, Picture Window, Shapes
Vinyl Colors Available:
EuroWhite, Tan (Beige),Earthtone
  • Stucco or Hardy board application
  • Designed to withstands a wind load of 131 MPH
  • Protects against leaking with rain gusts of up to 54 MPH
  • Easy to operate recessed tilt latches
  • Fusion welded sash is reinforced with aluminum
  • 3/4" Insulated glass for energy efficiency
  • Continuous head and sill
  • Concealed block and tackle balance system
  • Available in euro-white, tan, earthtone
  • Available in painted bronze exterior
  • Custom exterior colors available
Single Hung Window 6010

This is a 6010 Series single hung without the J-Channel. This window is offered for applications in which a J-channel is not desired. This option will go well in a Stucco application or Hardy board application.

7010 Series Entry level Vinyl Double Hung Window

Product types available: Double Hung, Picture Window, Shapes
Vinyl Colors Available:
EuroWhite, Tan (Beige),Earthtone
Exterior Colors Available:
  • Bronze available but not in stock
  • Earthtone available but not in stock
Custom colors available by special order!
Double Hung Window 7010

This window is suitable residential application If your in the market for a Double Hung window that has a true 180 brickmould, a 5 degree slope sill--then the 7010 window is the window for you. This window is a positioned for the mid-market, for those that are looking for a lower cost alternative to our 8010 and 8017 double hungs, but still has the features of double hung window. This window has been tested to a design pressure of 30 (DP30). This means that the window can withstand a wind load of 131 MPH without the window breaking. A DP30 window also has to pass a water test with wind blowing onto the window at 42 MPH. So in other words, the 7010 Series double hung window will not leak with rain blowing against the window at 42 MPH. Our Series 7010 comes with a factory integral mull on multiple windows, which creates a continuous head and sill--which further eliminates leaks in the field. The Sash has wide rails (like a clad window) and narrow stiles. If you can find a mid-market vinyl window with the curb appeal of the 7010 Series and performs better than our window, then, by all means--buy it!

8017 Series Premium Vinyl Double Hung window w/ clad-wood look

Product types available: Double Hung, Picture Window, Shapes
Features and benefits:
  • DP43 design loads
  • Withstands a wind load of 131 MPH without the window breaking
  • Protects against leaking with rain gusts of up to 42 MPH
  • 4 9/16" Vinyl Jamb
  • Contemporary style Clad-wood look
  • Full length finger plow on top and bottom rails
  • Continuous head & sill
  • 3/4" Overall insulated glass for energy efficiency
  • 14o Sloped sill
  • Aluminum Sill nail fin for added strength and rigidity
  • Concealed block and tackle balance system
  • Available in euro-white, tan, earthtone
  • Available in bronze painted exterior
  • customer exterior colors available
Double Hung Window 8017

This window is suitable residential application If your in the market for a Double Hung window that looks like a traditional clad window from the curb, has a contemporary clad-look, a 14 degree slope sill--like a traditional clad window--then the 8017 window is the window for you. This window has been tested to a design pressure of 30 (DP30). This means that the window can withstand a wind load of 131 MPH without the window breaking. A DP30 window also has to pass a water test with wind blowing onto the window at 42 MPH. So in other words, the 8017 Series double hung window will not leak with rain blowing against the window at 42 MPH. Our Series 8017 comes with a factory integral mull on multiple windows, which creates a continuous head and sill--which further eliminates leaks in the field. The Sash has wide rails (like a clad window) and narrow stiles which makes the window look exactly like a clad window. The Sash has wide rails (like a wood window) and narrow stiles which makes the window look exactly like a wood window.
The window has a an aluminum nail fin, for rigid installations; and a corner key with an 1/4 inch integral shim to eliminate crowning in the sill.

If you order the window with a bronze or earthtone exterior, we challenge you to tell the difference between our window and a clad window. Furthermore, whether your looking for windows for your house or an architect looking for a lower cost alternative to clad windows with the exact same look, then look no further. If you considering a roll-form clad window, we suggest you open up your eyes to our 8017--it's more economical, and, emphatically--it will not rot. If you can find an 4 9/16 vinyl window that looks like a clad window and performs better than our window, then, by all means--buy it!

8010 Series Premium level Vinyl Double Hung window w/ traditional wood look

Product types available: Double Hung, Picture Window, Shapes
Features and benefits:
  • DP30 design loads
  • Withstands a wind load of 131 MPH without the window breaking
  • Protects against leaking with rain gusts of up to 42 MPH
  • 4 9/16" Vinyl Jamb
  • Traditional 180 brickmould exterior
  • Full length finger plow on top and bottom rails
  • Continuous head & sill
  • 3/4" Overall insulated glass for energy efficiency
  • 14o Sloped sill
  • Aluminum Sill nail fin for added strength and rigidity
  • Concealed block and tackle balance system
  • Available in euro-white, tan, earthtone
  • Available in bronze painted exterior
  • customer exterior colors available
Double Hung Window 8010

This window is suitable residential application and carries a C30 commerial rating which makes this window eligible for many commercial projects and multi-family projects. If your in the market for a Double Hung window that looks like a traditional wood window from the curb, has a true 180 brickmould, a 14 degree slope sill--like a traditional stile wood window--then the 8010 window is the window for you. This window has been tested to a design pressure of 30 (DP30). This means that the window can withstand a wind load of 131 MPH without the window breaking. A DP30 window also has to pass a water test with wind blowing onto the window at 42 MPH. So in other words, the 8010 Series double hung window will not leak with rain blowing against the window at 42 MPH. Our Series 8010 comes with a factory integral mull on multiple windows, which creates a continuous head and sill--which further eliminates leaks in the field. The Sash has wide rails (like a wood window) and narrow stiles which makes the window look exactly like a wood window. The window has a 14 degree sloped sill, like a traditional wood window; an aluminum nail fin for rigid installations; and a corner key with an 1/4 inch integral shim to eliminate crowning in the sill. If you order the window with a bronze or Earthtone exterior, we challenge you to find a more pleasing window. If you can find an impact vinyl window that looks aesthetically pleasing and performs better than our window, then, by all means--buy it!

 

4710 Series Vinyl Casement Windows

Product types available: Casement, Picture Window, Shapes
Features and benefits:
  • DP65 design loads
  • Withstands a wind load of 203 MPH without the window breaking
  • Protects against leaking with rain gusts of up to 64 MPH
  • Canadian style exterior
  • 3/4" Overall insulated glass for energy efficiency
  • Stepped sill
  • Premium foldable crank style hardware
  • Available in euro-white, tan, earthtone
  • Available in bronze painted exterior
  • customer exterior colors available
Casement 4710 Series

Sash is designed in a Canadian style where the climate is very cold. Window system has the new Truth Hardware fold-out handle. This is a premium casement with 3/4 OA glass.

 

Vinyl Door Products

8005 Series Vinyl Sliding Patio Door (3/4" OA glass)

Features and benefits:
  • DP35 design loads
  • Withstands a wind load of 143 MPH without the window breaking
  • Protects against leaking with rain gusts of up to 48 MPH
  • 3/4" Overall insulated glass for energy efficiency
  • Sloped sill
  • ADA compliant sill
  • Available in euro-white, tan, earthtone
  • Available in bronze painted exterior
  • customer exterior colors available
Patio Door 8005 Series

This patio door has a J-channel, 180 Brickmould and an aluminum sill. This door meets a R35 (design pressure 35) which means it will not fail with a wind load of 143 MPH. this product is suitable for multi-family application and single family homes.

9600 Series Telescoping 4-panel Vinyl Sliding Patio Door

telescoping four panel Sliding Patio Door

Four separate tracks on the Series 9600 four panel telescoping patio door from MGM Industries enables each door panel to slide to either side, creating a 9-foot clear opening on a standard 12-foot wide door.

This is the first all-vinyl telescoping patio door in the USA, the unit withstands harsh salt-water environment of coastal areas, and is priced well below current wood 4-panel telescoping doors. This door is perfect to create an open "feel" between screened in porches and the main home. The door will "bring the outside into your home", like never before. For nature lovers, it's a way to go on vacation right in your home. Door handles are conveniently placed on both end panels, allowing entry or exit at either side. Featuring 3/4-inch insulating glass for energy efficiency, the doors are offered in standard white, tan and earthtone colors, as well as custom paint colors. The Series 9600 comes unassembled, and can be shipped via common carrier anywhere in the country.

Features and benefits:
telescoping four panel Sliding Patio Door







 

9000 Series Vinyl Sliding Patio Door (1" OA glass)

Features and benefits:
  • Withstands a wind load of 143 MPH without the window breaking
  • Protects against leaking with rain gusts of up to 54 MPH
  • Fusion welded sash is reinforced with steel
  • 1" Overall insulated glass for energy efficiency
  • Integral nail fin for easier installation
  • 4 9/16" Vinyl Jamb
  • Vinyl pocket sill
  • Available in euro-white, tan
  • Available in bronze painted exterior
  • customer exterior colors available
Patio Door 9000 Series

This patio door has a J-channel and a box-type sill construction. This system has an integral three-panel design for units that are nine feet wide and over. This door meets a R35 (design pressure 35) which means it will not fail with a wind load of 143 MPH. This product is suitable for multi-family application and single family homes.


The 9000 Series patio door now comes with optional blinds between the glass. To see a larger image of the 9000 Series door click on the image to the left. MGM Industries' warranty on this glass is 10 years.

Blinds between the glass are available in white only and is only available in one size. The size available is one inch (1") smaller on the width than than our standard 6'0 x 6'8 9000 Series door. The callout size is therefore 5'11" x 6'8".

The Rough Opening for Blinds between the glass is:
      71" x 80"


The Tip-to-tip size is 70 1/2 x 79 1/2.

 

9200/9300 Series Vinyl Swing Patio Door

Features and benefits:
  • Fusion welded sash is reinforced with aluminum
  • 1" Overall insulated glass for energy efficiency
  • Integral nail fin for easier installation
  • 4 9/16" Vinyl Jamb
  • Available in euro-white, tan
  • Available in bronze painted exterior
  • customer exterior colors available
9200 Series SwingPatio Door

Here's the hinge options for the swing door


How to understand all the numbers-9xxx


•The one's digit tells you the number of panels.
        1 for single panel, 2 for double panel, and 3 for three panel.
•The ten's digit tells the hardware.
        0 for Multipoint, 1 for single bore, and 2 for double bore.
•The hundreds digit tells you weather the door is Inswing or Outswing and if it is a "French stile"
        2 for Inswing and 3 for Outswing; 4 for "French Style" inswing and 5 for "French stile" outswing.
•The Thousands digit tells you the basic series. In this case a "Swing" configuration.




The following product numbers have Hoppe Multipoint hardware. This is a premium European stile hardware. This style hardware is the best hardware available on any door in the United States.
Hardware installed at MGM Industries
"Atrium style--Multipoint hardware"

•9201 Inswing Single Panel
•9202 Inswing 2-Panel
•9203 Inswing 3-Panel

• 9301 Outswing Single Panel
•9302 Outswing 2-Panel
•9303 Outswing 3-Panel
Hoppe Multipoint hardware
Hoppe Multipoint hardware
Hoppe Multipoint hardware

Hoppe Multipoint hardware
Hoppe Multipoint hardware
Hoppe Multipoint hardware
one panel
XO,OX
XOX,OOX,XOO,OXO

one panel fixed
XO,OX
XOX,OOX,XOO,OXO



Hardware installed at MGM Industries
"French Style--Multipoint hardware"

•9402 Inswing 2-Panel
•9502 Outswing 2-Panel
Hoppe Multipoint hardware
Hoppe Multipoint hardware
XO,OX
XO,OX

The following product numbers are pre-machined for standard Schlage or Kwikset locks. The doors come without the lock set.
Hardware not installed at MGM Industries
"Atrium Style--Single bore hardware"

•9211 Inswing Single Panel
•9212 Inswing 2-Panel
•9213 Inswing 3-Panel

•9311 Outswing Single Panel
•9312 Outswing 2-Panel
•9313 Outswing 3-Panel
Single Bore
Single Bore
Single Bore

Single Bore
Single Bore
Single Bore
one panel
XO,OX
XOX,OOX,XOO,OXO

one panel fixed
XO,OX
XOX,OOX,XOO,OXO

Hardware not installed at MGM Industries
"Atrium Style--Double bore hardware"

•9221 Inswing Single Panel
•9222 Inswing 2-Panel
•9223 Inswing 3-Panel

•9321 Outswing Single Panel
•9322 Outswing 2-Panel
•9313 Outswing 3-Panel
Double Bore
Double Bore
Double Bore

Double Bore
Double Bore
Double Bore
one panel
XO,OX
XOX,OOX,XOO,OXO

one panel fixed
XO,OX
XOX,OOX,XOO,OXO

5/8" OA IG single hung
DP 30
180° like brick mould
5° Slope Sill
Sliders available
Same as 5010, but has an integral transom.
(Jamb is continuous)
3/4" OA IG Single hung
4 9/16" Jamb
14° slope sill
180° brick mould
J-channel
Same as 5610, but has an integral transom.
(Jamb is continuous)
3/4" OA IG Single hung series
Upgradeable to DP 50 (See Windstrong 6060)
Sliders available
Brick mould removed from face of window
Balance of the window is the same as a 6010
Same as 6010, but has an integral transom.
(Jamb is continuous)
6010 Picture window with Integral transom.
(one piece jamb)
3/4" OA IG Double hung
2 3/8" Jamb thickness
180° brick mould profile
5° sloped sill
sliders not available
3/4" OA IG Double hung
4 9/16" Jamb thickness
180° brick mould profile
14°sloped sill
Sliders not available
Contemporary "Clad Aluminum" look Double hung
4 9/16" jamb thickness
14° slope sill
sliders not available
3/4" OA IG Casement
sliders not available
3/4" OA IG Sliding patio door
180 Brickmould Exterior
J-Channel
5° aluminum sill
1" OA IG Sliding patio door
Upgradable to DP 50 rated
(See 9050 in WindStrong Catalog)
Vinyl pocket sill
4 9/16" Vinyl Jamb
Welded Frame
Internal Weep Holes
Adjustable Hinges
Outswing Available